Bezel Blanks - HP dc7900 - Convertible Minitower PC Service & Reference Manual

Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1. Remove the front bezel
2. To remove the 3.5-inch bezel blank, push the two retaining tabs that hold the bezel blank in place
towards the outer right edge of the bezel (1) and slide the bezel blank to the right to remove it
(2).
Figure 8-11
3. To remove the 5.25-inch bezel blank, push the two retaining tabs that hold the bezel blank in place
towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 8-12
4. Replace the front bezel.
(Front Bezel on page
Removing a 3.5-inch Bezel Blank
Removing a 5.25-inch Bezel Blank
126)..
Bezel Blanks 127