Port Cover - HP dc7900 - Convertible Minitower PC Service & Reference Manual

Business pc
Hide thumbs Also See for dc7900 - Convertible Minitower PC:
Table of Contents

Advertisement

Port Cover

An optional rear port cover is available for the computer.
To install the port cover:
1.
Thread the cables through the bottom hole on the port cover (1) and connect the cables to the rear
ports on the computer.
2.
Insert the hooks on the port cover into the slots on the rear of the chassis, then slide the cover to
the right to secure it in place (2).
Figure 9-28
NOTE:
For security purposes, you can install an optional cable lock to the chassis that locks the port
cover and secures the computer. See
The port cover is secured in place by a retention lever just inside the port cover opening. To remove the
port cover, pull the lever back towards the port cover opening (1), then slide the cover to the left and off
the computer (2).
200 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
Installing a Port Cover
Installing a Security Lock on page
179.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq dc7900

Table of Contents