Type 3 Battery Holder - HP dc7900 - Convertible Minitower PC Service & Reference Manual
Business pc
Hide thumbs
Also See for dc7900 - Convertible Minitower PC:
- Troubleshooting manual (73 pages) ,
- Hardware reference manual (67 pages) ,
- Setup and configuration manual (35 pages)
Table of Contents
Advertisement
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time and any special system setups using Computer Setup. Refer to the
Computer Setup (F10) Utility Guide.
Type 3 Battery Holder
1.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2.
Insert the new battery and position the clip back in place.
Figure 7-57
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time and any special system setups using Computer Setup. Refer to the
Computer Setup (F10) Utility Guide.
112 Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Removing the battery from a type 3 holder
Advertisement
Table of Contents
