Front Bezel
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Lift up the latch behind the upper right side of the bezel and push down on the latch behind the
lower right side of the bezel (2), then pull the right side of the bezel off the chassis (1), followed by
the left side.
Figure 8-10
To install the front bezel, reverse the removal procedure.
126 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Computer Access Panel on page
Removing the Front Bezel
(Preparation for Disassembly on page
125).
118).