Table of Contents
Advertisement
Dell
4.10 LCD Control Panel
The LCD control panel is located on the front of the system chassis to provide user access to buttons,
display, and I/O interfaces. See Figure 6. The control panel includes the following features:
ACPI-compliant power button with an integrated green power LED (controlled by iDRAC6)
128x20 pixel LCD with controls:
o Two navigation buttons
o Select button
o System ID button
Non-maskable Interrupt (NMI) button (recessed)
Ambient temperature sensor
The LCD panel is a graphics display controlled by the iDRAC6. Both iDRAC6 and BIOS can send error
codes and messages to the display.
The system's LCD panel provides system information and status messages to signify when the system
is operating correctly or when the system needs attention.
BIOS has the ability to enter a secure mode through Setup, which locks the Power and NMI buttons.
When in this mode, the power button can still be used to turn on the server even when the power
button is disabled in System Setup.
For more information on the LCD panel, see the LCD Panel Features section in the About Your System
chapter in the PowerEdge T610 Hardware Owner's Manual on Support.Dell.com.
4.11 Security
For additional information regarding the following security features, see the PowerEdge T610
Hardware Owner's Manual on Support.Dell.com.
4.11.1 Cover Latch
The PowerEdge T610 comes with a tooled latch on the side cover of the system that secures it to the
chassis. A locked bezel secures the cover latch.
4.11.2 Bezel
A metal bezel is mounted to the chassis. A lock on the bezel is used to protect un-authorized access
to system hard drives and the control panel. System status on the LCD is viewable even when the
bezel is installed.
The bezel is standard for both the T610 tower and rack systems.
PowerEdge T610 Technical Guide
Figure 6.
LCD Control Panel
19
Advertisement
Table of Contents
