Chipset; Overview; Intel I/O Hub (Ioh); Ioh Quickpath Interconnect (Qpi) - Dell External OEMR T610 Technical Manual

Technical guide
Hide thumbs Also See for External OEMR T610:
Table of Contents

Advertisement

Dell

8 Chipset

8.1 Overview

The PowerEdge T610 planar incorporates the Intel
processor interfacing. This chipset is designed to support the Intel Xeon 5500 and 5600 processor
series family, QuickPath Interconnect, DDR3 memory technology, and PCI Express Generation 2. The
chipset consists of the Intel 5520 chipset I/O Hub (IOH) and ICH9.

8.2 Intel I/O Hub (IOH)

The planar uses the Intel 5520 chipset IOH to provide a link between the Intel Xeon processor series
5500 and 5600 processor(s) and the I/O components. The main components of the IOH consist of two
full-width QuickPath Interconnect links (one to each processor), 36 lanes of PCI Express Gen2, a x4
Direct Media Interface (DMI), and an integrated IOxAPIC.

8.3 IOH QuickPath Interconnect (QPI)

The QuickPath Architecture consists of serial point-to-point interconnects for the processors and the
IOH. The T610 has a total of three QuickPath Interconnect (QPI) links—one link connecting the
processors, and multiple links connecting both processors with the IOH. Each link consists of 20 lanes
(full-width) in each direction with a link speed of 6.4 GT/s. An additional lane is reserved for a
forwarded clock. Data is sent over the QPI links as packets.
The QuickPath Architecture implemented in the IOH and processors features four layers:
Physical layer—Consists of the actual connection between components. Supports Polarity
Inversion and Lane Reversal for optimizing component placement and routing.
Link layer—Responsible for flow control and the reliable transmission of data.
Routing layer—Responsible for the routing of QPI data packets.
Protocol layer—Responsible for high-level protocol communications, including the
implementation of a MESIF (Modify, Exclusive, Shared, Invalid, Forward) cache coherence
protocol.

8.4 Intel Direct Media Interface (DMI)

The DMI connects the Intel 5520 chipset IOH with the Intel I/O Controller Hub (ICH). The DMI is
equivalent to a x4 PCIe Gen1 link with a transfer rate of 1 GB/s in each direction.

8.5 PCI Express

PCI Express is a serial point-to-point interconnect for I/O devices. PCIe Generation 2 doubles the
signaling bit rate of each lane from 2.5 Gb/s to 5 Gb/s. Each of the PCIe Gen2 ports are backwards-
compatible with Gen1 transfer rates.
The IOH has two x2 PCIe Gen2 ports (1 GB/s) and eight x4 PCIe Gen2 ports (2 GB/s). The x2 ports can
be combined as a x4 link; however, this x4 link cannot be combined with any of the other x4 ports.
Two neighboring x4 ports can be combined as a x8 link, and both resulting x8 links can combine to
form a x16 link.

8.6 Intel I/O Controller Hub 9 (ICH9)

ICH9 is a highly integrated I/O controller, supporting the following functions:
Six x1 PCIe Gen1 ports, with the capability of combining ports 1-4 as a x4 link (ports are
unused on T610)
PCI Bus 32-bit Interface Rev 2.3 running at 33 MHz
PowerEdge T610 Technical Guide
®
®
Xeon
5520 processor series chipset for I/O and
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge t610

Table of Contents