Additional Riser Restrictions; Boot Order; Nics And External Controller Cards; Table 10. Available Add-In Cards And Controllers With Slot Priority And Max Supported Information - Dell External OEMR R810 Technical Manual

Dell

System supports 25W maximum power for the 1
cards.
o The lower power support on the third through sixth cards is due to system thermal
limitations
11.2.3

Additional Riser Restrictions

118B

The riser connectors on the IO Board do not support plugging in a standard PCI Express card.
Do not attempt this for troubleshooting.

Two R810 risers must be installed or the system will not power up.

Standard height (4.376‖)

Maximum length of 9.5‖ (Half length cards are 6.6‖, Full length cards are 12.283‖)

No support for hot-plug or hot-removal

Compliant with the PCI Express Card Electromechanical Specification Rev 2.0

R810 provides a minimum transverse air velocity of 100 LFM (linear feet per minute) to
the x16 card.
For more information, please refer to the following specifications:

PCI Express Base Specification, Rev 2.0, 12/20/06

PCI Express Card Electromechanical Specification, Rev 2.0, 4/11/07

PCI Express x16 Graphics 150W-ATX Specification, Rev 1.0, 10/25/04

PCI Environmental Specification (Dell Part Number CC172), Rev A00, 2/14/05
11.3

Boot Order

73B
System boot order is settable in the BIOS.
11.4

NICs and External Controller Cards

74B
Remote Access
Controller
Internal Controllers
External Controllers
Dell PowerEdge R810 Technical Guide
Table 10. Available Add-In Cards and Controllers with Slot Priority and
Description
iDRAC6 Enterprise
PERC H200 or PERC H700 Integrated
PERC H800 Adapter w/ 512MB BB Cache
PERC 6/E Adapter w/ 256MB BB Cache
st nd
and 2 cards and 15W for the 3
Max Supported Information
rd th
through 6
Slot
Max priority
Dedicated
1 iDRAC6 Slot
Dedicated
storage
1 slot
2 6,5
2 6,5
39