Dell
The Cable Management Arm (shown in Figure 8) organizes the cords and cables at the back of the
server and unfolds to allow the server to extend out from the rack without removing cables.
Front and Rear Rack Mount and Rail Views Showing CMA and Support Tray
Figure 8.
4.12
Fans
33B
Six hot-swappable fans are mounted in a fan gantry that is located in the chassis behind the
processors. Each fan has a blind mate 2x2 connector that plugs directly into the CPU Board. There is
an additional fan integrated in each power supply to cool the power supply subsystem and also
provide additional cooling for the whole system.
R810 Fan Gantry Location
Figure 9.
Dell PowerEdge R810 Technical Guide
16