Table of Contents
Advertisement
Recording an optional
component to an SD card/
USB device
Before recording, check the following.
Connect the optional component.
Turn the optional component on.
Adjust the volume of the optional
component.
The SD card (or USB device) is usable
with the unit. (page 6)
There is sufficient capacity on the SD
card/USB device.
Perform the following to check the
capacity.
1. Press MENU.
2. Press until "SD" or "USB"
appears, then press ENTER.
3. Press until "Recordable Time"
appears, then press ENTER.
1
Connect the AUDIO IN jack to the
line output jack of the portable
digital music player or other
components using an audio
connecting cable (not supplied).
Use a cable that has a stereo mini plug
on one end for connection to this unit,
and a suitable plug for connection to the
external device.
GB
Basic Operations
audio connecting cable
(not supplied)
(e.g.,portable digital
music player)
2
Press AUDIO IN (direct power-on).
3
Turn the connected component on.
For details, refer to the instruction
manual of the component to be
connected.
Advertisement
Table of Contents
