To control the screen contrast
1
Press MENU.
Press until "Common Settings"
appears, then press ENTER.
Press until "Contrast" appears, then
press ENTER.
Control the screen, then press ENTER.
To adjust the backlight brightness
1
Press MENU.
Press until "Common Settings"
appears, then press ENTER.
Press until "Brightness" appears, then
press ENTER.
Press to select screen brightness, then
press ENTER.
"" is displayed in selected brightness.
To use the power-management function
If no operation is performed for more than 20
minutes in CD, SD, USB, and AUDIO IN
mode, the unit will enter stand-by mode
automatically. The default setting is "ON".
1
Press MENU.
Press until "Common Settings"
appears, then press ENTER.
Press until "Auto Standby" appears,
then press ENTER.
Press until "ON" appears, then press
ENTER.
To change the language
1
Press MENU.
Press until "Common Settings"
appears, then press ENTER.
Press until "Language" appears, then
press ENTER.
Select the language you want to set, then
press ENTER.
Tip
The default setting is English.
1
GB
Preparation