Basic Features for the TV
Aerial
→
→
Menu
Channel
Aerial
Before your product can memorize the available channels, you must select your Product signal source,
aerial) or Cable. Select
Air
or Cable. After you have selected the signal source, go on to the
✎
Selecting the signal source using the
example, if you receive your product signal over the air, and you select Cable, you will see only snow. You must
select
Air
to see a picture.
Country
Menu
→
Channel
→
Country
Select your country so that the product can correctly auto-tune the broadcasting channels.
✎
The PIN input screen appears. Enter your 4 digit PIN number.
Digital
Channel: Change the country for digital channels.
•
•
Analogue
Channel: Change the country for analogue channels.
Auto Tuning
→
→
Menu
Channel
Auto Tuning
Scans for a channel automatically and stores in the TV.
✎
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a
channel is locked using the Channel Lock function, the PIN input window appears.
•
Auto Tuning
Scans for channels automatically and stores them in the TV's memory.
Cable Search Option
(when the aerial was set to Cable) (Depending on the country)
•
Sets additional search options such as the frequency and symbol rate for a cable network search.
•
Digital & Analogue
/
Digital
Select the channel source to memorise. When selecting
scan for cable channels.
•
Automatic Ordering
(Depending on the country)
Channels found will be automatically ordered following a criterion established by all the main national and local
televisions.
✎
Available only when the aerial source is set to Air.
Memorizing Channels
Aerial
function also determines the signal source the product is tuned to. For
/
Analogue
English - 49
Cable
→
Digital & Analogue
Air
(using an
Auto Tuning
function.
or Digital: Provide a value to