Table of Contents
Advertisement
7. To clear the search and return to the last page displayed, press
|
|
EXIT
EXIT
EXIT
menus, you could have gone looking for another place.)
NOTE:
Search works from mapping and POI data loaded in the unit. If you
do not have a high-detailed custom map (containing POI data) for
the area you are searching loaded on the MMC, you may not find
anything.
Set a Waypoint
A waypoint is simply an electronic "address," based on the latitude and
longitude of a position on the earth. A waypoint represents a location,
spot, or destination that can be stored in memory, then be recalled and
used later on for navigation purposes.
You can create a waypoint at the cursor position on the map, or at your
current position while you are navigating. You can create a waypoint at
any location by manually entering the position's latitude and longitude.
You can copy waypoints from your IntelliMap 320 to your personal
computer with MapCreate software. When you want to repeat a trip,
these archived waypoints can be reloaded into your GPS unit.
To create and save a Waypoint:
These first two techniques use the Quick Save method, the fastest and
easiest way to create a waypoint.
Create Waypoint at Current Position
While you are traveling, press
automatically given a name with a sequential number, such as "way-
point 003." The waypoint symbol and number appear on the map.
Map screen showing Finding Waypoint,
the result of a restaurant search.
|
. (Before you completely exited out of the Search
EXIT
|
. The waypoint is saved and
WPT
WPT
37
Advertisement
Table of Contents
