Edit Waypoint Lat/Lon - Eagle View Installation And Operation Instructions Manual

Eagle view: user guide

Hide thumbs Also See for View:

Table of Contents

Highlight the "Save Position As" label as shown below left and press the

right arrow key when you're at the location you wish to save. This saves

your present position under the waypoint number you selected on the first

page.

Saving Cursor Position as a Waypoint

(Select Number Method)

To save the cursor position under a specific waypoint number, first posi-

tion the cursor at the desired position. Then follow the previous instruc-

tions for saving your present position as a waypoint using the select num-

ber method. Remember, the method of saving your present position and

the cursor's position is identical.

Edit Lat/Lon

The Eagle View lets you enter any lati-

tude/longitude using the keyboard and

save it under any waypoint number, from

1 to 250. You can also change any

waypoint's position using this method. To

do this, first select the waypoint number

that you want to save a position under

from the waypoint menu. In this example,

we'll use waypoint number 10. Next,

highlight the "WPT-Options" menu and

press the right arrow key. Now highlight the "Edit Lat-Lon" menu and press

the right arrow key. The screen shown above appears. Using the left and

right arrow keys, highlight each number in the position and change it us-

ing the up and down arrow keys. When you're ready to save this position

and return to the waypoint screen, press the ENT key. The location you

entered shows at the bottom of the screen under the waypoint number

you selected. Note: You can also use this method to change the position

of an existing waypoint.

Table of Contents