Set Local Time; Show Waas Alarm - Eagle IntelliMap 320 Installation And Operation Instructions Manual

Set Local Time

Using the correct local time setting is handy when estimating local ar-
rival time while navigating. Also, the time and date are saved when a
waypoint is created.
To access the Set Local Time menu, you must first acquire your posi-
tion. Once that is done: press
|
S L T
ET OCAL IME
Once in the Time Settings menu:
To set Local Time: Press
ter, then press → to move the cursor to the next character. Repeat until
the time is correct, then press
To set the Month: Press ↓ to
month, then press
To set the Day: Press → to
then press
ENT
To set the Year: Press → to
then press
ENT
The last field in this menu is
telliMap 320 to automatically adjust with the time change caused by
Daylight Saving Time (you should only have to set it once). You may
select which set of rules matches DST in your region, or simply accept
the default.
Once you have each field set the way you want, press
until you return to the previous page.

Show WAAS Alarm

When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS re-
ceiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. If you want,
you have the option of turning off the WAAS Acquired/Lost alarm with-
out affecting how the IntelliMap 320 uses WAAS. Here's how:
1. Press
MENU
2. With the option highlighted, press
check it (turn on.) After the option is set, press
the page display.
.
ENT
ENT
.
ENT
.
.
| |↓ to
MENU GPS S
| |↓ to
MENU MENU
. Press ↑ or ↓ to change the first charac-
.
ENT
|
M ENT
ONTH
. Press ↑ or ↓ to select the day,
|
D ENT
AY
. Press ↑ or ↓ to select the year,
|
Y ENT
EAR
. This feature allows your In-
C DST
ONFIG
| |↓ to
ENT
ETUP
to uncheck it (turn off) and
ENT
88
S S
YSTEM ETUP
. Press ↑ or ↓ to select the
EXIT
S WAAS A
HOW
|
EXIT EXIT
| |↓ to
ENT
repeatedly
.
LARM
to return to