Reset Groups; Waypoints; Waypoint Menu; Saving Your Present Position As A Waypoint (Quick Save Method) - Eagle IntelliMap Journey Installation And Operation Instructions Manual

Gps and sonar
Table of Contents

Advertisement

box or save your changes by pressing the ENT
key. If you want to leave this screen without sav-
ing the changes, simply press the EXIT key. Use
this same method to change the NAV screens.

Reset Groups

To restore all boxes on the navigation and plotter screens to their factory
settings, first press the MENU key, then highlight the "System Setup" la-
bel and press the right arrow key. Now highlight the "Reset Groups" label
on this menu. Press the right arrow key. A message appears, asking if you
really want to do this. Press the right arrow key to continue, or the left
arrow key to exit without resetting the groups.

WAYPOINTS

This GPS receiver gives you the ability to create your own database of
locations, called "waypoints'. You can save your present position, cursor
position, or enter a coordinate and save it as a waypoint. For example,
you may wish to store the location of your parked car as a waypoint be-
fore starting on a hike. When you want to return to the car, all you have to
do is recall the waypoint and the unit will show distance and bearing from
your present position to the car. This unit stores up to 750 waypoints.

Waypoint Menu

With few exceptions, in order to save, modify, or
recall a waypoint, you'll use the waypoint menu,
shown at right. To see this menu, simply press
the WPT key. The current waypoint number shows
at the top of the screen. Its name appears be-
neath the "GO TO WAYPOINT" label. The
waypoint's position, distance and bearing from
your present position to the waypoint, and the
date and time the waypoint was saved show at
the bottom of the screen. It's icon shows just to the right of the date and
time. In short, all of the detail about the waypoint shows on this screen.
Saving Your Present Position as a Waypoint
(Quick Save Method)
To save your present position, simply press the WPT key twice. Your cur-
rent position is placed into the first available waypoint number on the list.
A message appears on the display telling you the waypoint number it just
used. This also momentarily places you in the waypoint menu. Anytime
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

StatusJourney and statusJourney

Table of Contents