To Change Displayed Data Font Size - Eagle Cuda 240 S/GPS Installation And Operation Instructions Manual

2. Press ↓ or ↑ to select Data Type|
pears from the top of the list and reverts to its previous, unchecked po-
sition. (If you wish, you may now use ↓ or ↑ to select other Data Types
to turn off.)
3. To return to the previous page, press

To change displayed data font size:

1. From the Plotter or Sonar page, press
2. Press ↓ or ↑ to select Data Type|press → or ← to Data Size|
The selected data type will be displayed in the new size. (To change the
font size for another Data Type, press
ginning with step two above.)
3. To return to the previous page, press
Tip:
If you wish, you can change the displayed data font size when you
select a data type:
1. From the Plotter or Sonar page, press
| .
D ENT
ATA
2. Press ↓ or ↑ to select Data Type|press → or ← to select Data
Size| .
ENT
The data will be shown in the new font size. To return to the previ-
ous page, press
Depth
Water
temp.
Distance to
destination
Sonar Page with Overlay Data turned on. This example shows Depth,
Water Temp. and the Distance to the next waypoint in the current route.
| .
EXIT EXIT
The selected data type disap-
ENT.
|
EXIT EXIT
|↓ to
MENU
and repeat these steps, be-
ENT
.
EXIT
115
.
O D
VERLAY ATA
EXIT
|↓ to
MENU
| .
ENT
.
O
VERLAY