First, press
PAGES
press
.
EXIT
To select data for display:
1. From the Plotter or Sonar page, press
2. Press ↓ or ↑ to select Data Type|
Overlay Data command on the Sonar Menu, at left. Overlay Data
Shown selection menu, right. In this example, we scrolled down the
When selected, the data type shifts to the top of the data list and a
check mark appears beside the data type. (If you wish, you may now
use ↓ or ↑ to select other Data Types for display.)
Data list showing "Ground Speed" selected to display on Sonar Page.
3. To return to the previous page, press
To turn off displayed data:
1. From the Plotter or Sonar page, press
, use the arrow keys to select the right page, then
data list to highlight "Ground Speed."
|↓ to
MENU
ENT.
|
EXIT
EXIT
|↓ to
MENU
114
O
D
VERLAY
ATA
.
O
D
VERLAY
ATA
|
.
ENT
|
.
ENT