Unregister The Handsets; Call Services; Call Forward; Activate/Deactivate Call Forward - Philips SE8881B/38 User Manual

Unregister the handsets

If two handsets share the same base station, you
can unregister a handset with another handset.
1
Access the "Services" menu on the handset
or base station (see "Access the services
menu" in the previous paragraph in this
chapter).
2
Select [Unregister], then press [OK] to
confirm.
3
Enter the system PIN. Press [Clear] to
make corrections.
4
Select the handset number to be
unregistered.
5
Press [OK] to confirm.
» The handset is unregistered.
Tip
•
The handset number is displayed beside the handset
name in standby mode.
Note
•
The preset PIN is 0000. No change can be made on it.

Call services

The call services are network and country
dependent. Contact your service provider for
information.
Note
•
For the call services to work properly, make sure that
the activation and/or deactivation codes are correctly
entered.
EN
46

Call forward

You can divert your calls to another phone
number. You can select among 3 options:
[Call forward]: divert all incoming calls to
•
another number.
[Call fwd busy]: divert calls when the line
•
is busy.
• [Call fwd unans]: divert calls when no one
answers.

Activate/Deactivate call forward

1
Access the "Services" menu on the handset
or base station (see "Access the services
menu" in the previous paragraph in this
chapter).
2
Select [Call Services] > [Call forward]/
[Call fwd busy]/[Call fwd unans]
3
Select [Activate]/[Deactivate], then press
[OK] to confirm.
4
Enter the telephone number.
» The setting is saved.

Edit the activation/deactivation code

You can edit the prefix and suffix to the call
forward codes.
1
Access the "Services" menu on the handset
or base station (see "Access the services
menu" in the previous paragraph in this
chapter).
2
Select [Call Services] > [Call forward]/
[Call fwd busy]/[Call fwd unans], then
press [OK] to confirm.
3
Select [Change code], then press [OK].
4
Then you can either
Select [Activation] > [Prefix]/[Suffix],
•
then press [OK] to confirm; or
• Select [Deactivation], then press
[OK] to confirm.
5
Enter or edit the code, then press [OK] to
confirm.
» The setting is saved.