Bluetooth; Rename Your Device; Pair Se888; Pair Se888 With Your Mobile Phones - Philips SE8881B/38 User Manual

4 Bluetooth

SE888 supports Bluetooth wireless technology.
You can connect it to a compatible Bluetooth
device such as a computer and mobile phone.
Then you can make and receive calls from your
mobile phone on the SE888 handset. You can
also download the phonebook and call log from
your computer or mobile phone with its base
station.
Note
•
Make sure that the other Bluetooth devices with
which you establish a connection support Bluetooth
function. See the user manual of the other devices for
information.
•
The Bluetooth connection is subject to interference
from obstructions such as walls or other electronic
devices.

Rename your device

The name of your phone is SE888 by default.
You can rename it in this way:
1
On the base station, press MENU.
2
Select [Bluetooth] > [Rename Me], then
press [OK] to confirm.
3
Edit the name, then press [Save] to
confirm.

Pair SE888

Pair SE888 with your mobile phones

Make sure the Bluetooth function of the mobile
phones is activated and in search status. Then
you can do the pairing in this way:
1
On the base station, press MENU.
2
Select [Bluetooth] > [Find Me].
3
Place the mobile phone close to the base
station, then press [OK] to confirm.
» The mobile phone name is displayed
on the screen.
4
On the mobile phone, select SE888 and
connect.
5
Enter the PIN code on the mobile phone,
if necessary.
Tip
•
The default PIN code is 0000.
» When SE888 and the mobile phone
are paired,
screen of the handset and base station.
Note
•
When the Bluetooth device list is full, remove some
mobile phone names before pairing can start.
•
If the name of SE888 exists in your mobile phone, you
have to remove it from your mobile phone. Then you
can do the pairing again.
•
When pairing is successful, you can add the new mobile
phone name to the active list. Remove some mobile
phone names if the active list is full. See "Manage the
devices list" in this chapter for information.

Pair SE888 with your computer

Install the PC software 'ThinkLink' saved in the
cd rom or at http://www.philips.com/support
1
Double click on Setup.exe to start the
installation.
2
Select the display language.
3
After the installation is done, select '?' and
follow the instructions to do the pairing.
or is displayed on the
EN
17