Divert The Incoming Call To The Answering Machine; Turn Off The Ringer For All Incoming Calls; Adjust The Volume During A Call; Mute The Microphone - Philips SE8881B/38 User Manual

Divert the incoming call to the
answering machine
Press on the handset or base station when
receiving a call.
Turn off the ringer for all incoming
calls
Press on the handset or base station.
» The ringer is off.
Adjust the volume during a
call
Press / on the handset or
base station to change the volume during a call.

Mute the microphone

1
Press on the handset or base station
during a call.
» [Mute on] is displayed.
» The caller cannot hear you, but you
can still hear the caller's voice.
2
Press again on the handset or base
station to unmute the microphone.
» You can now communicate with the
caller.

Turn the speaker on or off

Press on the handset.

Make a second call

Note
•
This service is network-dependent.
EN
22
/ on the
1
You can make a second call in these ways:
• Press
CALL WAIT on the base station
during a call.
• The first call is put on hold.
Press [Option] and select [Start 2nd
•
call], then press [OK] to confirm.
• The current call is put on hold.
2
Dial the second number.
» The number displayed on the screen is
dialed out.
Tip
•
For information of how to make a call through the land
line or the Bluetooth line, see the section on "Make a
call".

Answer a second call

Note
•
It is a country-dependent setting.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1
Press and on the handset or
FLASH/CALL WAIT and
station to answer the call.
» The first call is put on hold, and you
are now connected to the second call.
2
Press and or FLASH/CALL WAIT
and 1 on the base station to end the
current call and answer the first call.
Toggle between two calls on
the handset and base station
You can toggle your calls on the handset or
base station in these ways:
on the handset or FLASH/
on the base