Telephone Answering; Additional Handsets - Philips M350 Short User Manual

Enjoy
4
Phonebook
Add record
1 Press .
2 Select [Phonebook] > [Add new].
3 Follow on-screen instructions.
Call from the phonebook
1 Press .
2 Select a record and press .
Call from the direct access memory
Press and hold on the keys in standby mode. The
availaibility of direct access memory is country
dependent.
Call log
Call from the call log
1 Press
.
2 Select a record and press
.
View record
> [View].
Press >
Save record
1 Press .
2 Select a record and press >
[Save number].
3 Follow on-screen instructions.
Delete record
1 Press > [Delete].
>
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press .
2 Select a record and press .
Save record
1 Press .
2 Select a record and press >
[Save number].
3 Follow on-screen instructions.
Delete record
1 Press > [Delete].
>
2 Follow on-screen instructions.

Telephone answering

machine (for M355 only)
Turn the answering machine on or off
1 Press > [Answ. machine] > [On/off].
2 Follow on-screen instructions.
• [On] > [Answer only] means the answering
machine is on. Calls are only answered,
messages are not recorded.
• [On] > [Answer & rec.] means the answering
machine is on. Calls are answered and
messages are recorded.
Listen to the incoming messages
Press > [Answ. machine] > [Play].
Delete an incoming message
1 When you listen to the message, press
to
enter the options menu.
2 Select [Delete], then press to confirm.
Register the handset or

additional handsets

You can register additional handsets to the base
station.
1 Press on the handset.
2 Select [Services] > [Register], then press
to confirm.
3 Press and hold on the base station for 10 seconds.
4 Enter the system PIN/passcode (0000).
5 Press to confirm the PIN/passcode.
Registration is complete in less than 2 minutes.
»
Note
• The preset PIN is 0000.
• The handset and the base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take
the line, make a call and receive a call. The
advanced features may not be available if
you use them with other makes. To register
the handset to another GAP-compliant base
station, follow the registration procedure of
that base station.
Restore default settings
You can reset your phone settings to the original
factory settings, and recall the original PIN/
passcode.
1 Press .
2 Select [Services] > [Reset], then press to
confirm.
3 Follow on-screen instructions.