Unregister The Handsets; Restore Default Settings - Philips X200 Extended User Documentation

2
to select [Services] >
Press /
[Register], then press OK to confirm.
3
Press and hold
5 seconds.
4
Enter the system PIN. Press REDIAL/C
to make corrections. Then press OK to
confirm the PIN.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
For models with an answering machine, you hear a
confirmation beep.
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
•
The preset PIN is 0000. No change can be made on it.

Unregister the handsets

1
Press MENU.
2
to select [Services] >
Press /
[Unregister], then press OK to confirm.
3
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
4
Select the handset number to be
unregistered.
5
Press OK to confirm.
» The handset is unregistered.
Tip
•
The handset number is displayed beside the handset
name in standby mode. Philips 6 is assigned on the
base unit.
EN
26
on the base station for

Restore default settings

You can reset your phone settings to the
original factory settings.
1
Press MENU.
2
to select [Services] >
Press /
[Reset], then press OK to confirm.
» A confirmation request is displayed.
3
Press OK to confirm.
» All settings are reset.