Unregister The Handsets; Restore Default Settings - Philips D130 Extended User Documentation

Note
•
If the PIN is incorrect or no base is found within a
certain period, a notification message will be displayed
on your handset.
•
If registration fails, unplug the power adapter from the
base station and plug it back. Wait for 15 seconds, and
then repeat the registration procedure.
•
The preset PIN is 0000. No change can be made on it.

Unregister the handsets

If two handsets share the same base station, you
can unregister a handset with another handset.
1
Press MENU/OK.
2
Select [SERVICES] > [UNREGISTER],
then press MENU/OK to confirm.
3
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
4
Select the handset number to be
unregistered.
5
Press MENU/OK to confirm.
» The handset is unregistered.
Tip
•
The handset number is displayed beside the handset
name in standby mode.
Note
•
A handset cannot unregister itself.

Restore default settings

You can reset your phone settings to the
original factory settings.
1
Press MENU/OK.
2
Select [SERVICES] > [RESET], then press
MENU/OK to confirm.
» A confirmation request is displayed on
the handset.
3
Press MENU/OK to confirm.
» All settings are reset.
EN
29