Intercom And Conference Calls; Make A Call To Another Handset; While You Are On The Phone; Toggle Between Calls - Philips SE8881B/38 User Manual

6 Intercom and
conference calls
An intercom call is a call to another handset
that shares the same base station. A conference
call involves a conversation among you, another
handset user and outside callers.
Make a call to another
handset
Note
•
If the base station only has 2 registered handsets, press
and hold * on the handset or press INTERCOM on
the base station to make a call to another handset.
1
Press and hold * on the handset or press
INTERCOM on the base station.
» The handsets available for intercom are
displayed.
2
Select a handset, then press [OK] to
confirm.
» The selected handset rings.
» The intercom is established.
3
Press [Cancel] to cancel or end the
intercom call.
Note
•
If the selected handset is occupied in a call, you hear a
busy tone.

While you are on the phone

You can go from one handset to another during
a call:
1
Press and hold * on the handset or press
INTERCOM on the base station.
» The current caller is put on hold.
EN
24
2
Select a handset number, then press [OK]
to confirm.
» Wait for the other side to answer your
call.

Toggle between calls

Press and hold * on the handset or
INTERCOM on the base station to switch
between the outside call and the intercom call.

Transfer a call

1
Press and hold * on the handset or press
INTERCOM on the base station during a
call.
» The handsets available for intercom are
displayed.
2
Select a handset number, then press [OK]
to confirm.
3
Press on the handset or
on the base station when the other side
answers your call.
» The call is now transferred to the
selected handset.

Make a conference call

A 3-way conference call is a call between you,
another handset user and outside callers. It
requires two handsets to share the same base
station.

During an external call

1
Press and hold * on the handset or press
INTERCOM on the base station to initiate
an internal call.
» The handsets available for intercom are
displayed.
» The external caller is put on hold.
/HOME