Download Print this page

Dial Mode; Auto Clock; Register Additional Handsets; Unregister The Handsets - Philips D120 User Manual

Hide thumbs

Advertisement

2
Select [SERVICES] > [RECALL TIME],
then press MENU/OK to confirm.
3
Select an option, then press MENU/OK to
confirm.
» The setting is saved.

Dial mode

Note
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Press MENU/OK.
2
Select [SERVICES] > [DIAL MODE], then
press MENU/OK to confirm.
3
Select a dial mode, then press MENU/OK
to confirm.
» The setting is saved.
Note
If your phone is in pulse dial mode, press
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.

Auto clock

Note
This service is network dependent.
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
24
EN
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
2
3

Register additional handsets

You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1
2
3
4
during a

Unregister the handsets

If two handsets share the same base station, you
can unregister a handset with another handset.
1
2
Press MENU/OK.
Select [SERVICES] > [AUTO CLOCK],
then press MENU/OK to confirm.
Select [ON]/[OFF], then press MENU/OK.
» The setting is saved.
Press and hold
on the base station for
5 seconds.
Press MENU/OK on the handset.
Select [SERVICES] > [REGISTER], then
press MENU/OK to confirm.
Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to confirm the PIN.
» Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
The preset PIN is 0000. No change can be made on it.
Press MENU/OK.
Select [SERVICES] > [UNREGISTER],
then press MENU/OK to confirm.

Hide quick links:

Advertisement

loading

  Also See for Philips D120