Parts And Functions; Control Panel; Power Button; Mute Button - Philips BDL4245E/27 User Manual

2.

Parts and Functions

2.1.

Control Panel

POWER button

1
Switch the power on or put the monitor to standby.

MUTE button

2
Switch the audio mute ON/OFF.
INPUT button
3
Set the function while OSD menu is on, or to activate input
selection menu while OSD menu is off.
[ ] button
4
Increase the adjustment while OSD menu is on, or to decrease the
audio output level while OSD menu is off.
[ ] button
5
Decrease the adjustment while OSD menu is on, or to decrease the
audio output level while OSD menu is off.
[ ] button
6
Move the highlight bar up to adjust the selected item while OSD
menu is on.
[ ] button
7
Move the highlight bar down to adjust the selected item while OSD
menu is on.

MENU button

8
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
9
MUTE INPUT
1 2 3 4 5 6
MENU
7 8
NOTE: "Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [
and [ ] buttons and hold down continuously for more than
3 (three) seconds.
R emote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the monitor:
- Lights green when the monitor is turned on
- Lights red when the monitor is in standby mode
- Lights amber when the monitor enters DPMS mode
- When {SCHEDULE} is enabled,
- If the indicator blinks red, it tells that a failure is detected
- Off when the main power of the monitor is turned off
5
BDL3245E / BDL4245E / BDL4645E
it would blink green and red
]