• When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.
Page 3
BDL4254ET Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off.
BDL4254ET REGULATORY INFORMATION CE Declaration of Conformity We declare under our responsibility that the product is in conformity with the following standards: • EN60950-1:2006+A11:2009+A1:2010+A12:2011 (Safety requirement of Information Technology Equipment). • EN55022:2010 (Radio Disturbance requirement of Information Technology Equipment). • EN55024:2010 (Immunity requirement of Information Technology Equipment).
Page 5
BDL4254ET Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source.
Page 6
BDL4254ET Information for U.K. only WARNING – THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse.
Page 8
BDL4254ET North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
BDL4254ET Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it.
BDL4254ET 1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with UL1678 standard in North America. Protective Sheet Table 1.
BDL4254ET 1.5. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise. The “ ” logo should be on the LEFT side when facing the display.
BDL4254ET Parts and Functions 2.1. Control Panel MUTE INPUT MENU NOTE: “Keyboard Control Lock Mode” This function completely [POWER] button disables the access to all Keyboard Control functions. To Press to turn the display on or put the display to standby.
BDL4254ET 2.2. Input/Output Terminals 9 10 11 12 14 15 AC IN VGA IN (D-Sub) AC power input. VGA video input. MAIN POWER SWITCH VGA AUDIO IN Main power on/off switch. Audio input for VGA source (3.5 mm stereo phone).
BDL4254ET 2.3. Remote Control [DISPLAY] button Press to turn on/off the information OSD displayed on the upper right corner of the screen. 2.3.1. General functions [ ] button • Press to move the selection left in OSD menu. POWER • Press to decrease the value in OSD menu.
BDL4254ET 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment.
BDL4254ET Connecting External Equipment 3.1. Using the Switch Cover A cover for the power switch is provided to prevent the display from being turned on or off accidentally. To lock the cover into position: 1. Align and insert the cover to the indentation located beside the power switch.
BDL4254ET 3.3. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: U p to maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.3.1. Control connection DISPLAY 1 DISPLAY 2 [RS-232C] [RS232C IN] [RS232C OUT] [RS232C IN] 3.3.2. Video connection DISPLAY 1 DISPLAY 2 [VGA IN] [DVI OUT/VGA OUT]...
BDL4254ET 3.5. Fixing your external PC This display reserved 6 pcs of M4 screw holes with 100 mm pitch for mounting your Smart Insert Module. (by using M4x10 screw) 100 mm...
BDL4254ET 3.6. Touch Operation Zoom in This display is equipped with a touch-sensitive screen and supports Touch the target on the screen with two fingertips holded together and the Windows Touch features either by singletouch or multitouch move them apart to zoom in (magnify) the screen image. operation. You can touch the pictures or words on the display gently with your fingers, and your computer will react.
Page 22
BDL4254ET The Touch screen does not require a device driver be installed on the host computer for all modes of operation. For Windows 7 and Windows 8, it is recommended that the standard Microsoft Window Control Panel calibration is used.
BDL4254ET OSD Menu 4.2. OSD Menu Overview An overall view of the On-Screen Display (OSD) structure is shown 4.2.1. Picture menu below. You can use it as a reference for further adjusting your display. 4.1. Navigating the OSD Menu Brightness...
BDL4254ET This item is functional only when {Color temperature} is set Clock phase NOTE: to {User}. Adjust to improve the focus, clarity and stability of the image. Smart contrast This item is functional for VGA input only. NOTE: When turned on, this function helps enhance image contrast when Zoom mode displaying dark scenes.
BDL4254ET Audio reset H position Moves the horizontal position of the image left Reset all settings in the Audio menu to factory preset values. or right. Card OPS audio Select the analog or digital audio mode for card OPS. V position Moves the vertical position of the image up or 4.2.4.
BDL4254ET By pressing the [PIP ON/OFF] button on the remote control, you can Panel saving change the mode in the order shown below: Choose to enable the panel saving functions and thus reduce the risk of “image persistence” or “ghost-imaging”.
BDL4254ET OSD V-position • IP address • Subnet mask Adjust the vertical position of the OSD menu. • Default gateway Monitor information • Login user name (The default user name is {admin}) Shows information about your display, including model number, serial • Login password (The default password is {0000})
Page 28
BDL4254ET Gamma selection Tiling Gamma is what controls the overall brightness of an image. Images With this function you can create a single large-screen matrix (video which are not corrected properly can appear too white or too dark, so wall) that consists of up to 150 sets of this display (up to 10-sets on controlling the gamma properly can have a huge influence on the overall the vertical and 15-sets on the horizontal sides).
Page 29
BDL4254ET Frame comp. - Yes 2. Press [ ] or [ ] button to toggle between {Year}, {Month}, {Day}, {Hour}, {Minute}, and {Daylight saving time}. 3. Press [ ] or [ ] button to adjust all settings except {Daylight saving time}.
Page 30
BDL4254ET • {Auto ID} Input-source selection: Press [ ] or [ ] button to select an input source. If no input source is selected, the input source The option are: {Start} / {End}. The default is {End}. will remain the same as last selected.
BDL4254ET Input Mode PC Resolution: Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 60 Hz 25.175 MHz 72 Hz 31.5 MHz Video Graphic Array 75 Hz 31.5 MHz WVGA 70 Hz 33.75 MHz...
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions.
Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub- pixel defects exceeding the tolerances listed in the following table.
BDL4254ET Cleaning and Troubleshooting 7.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes.
BDL4254ET 7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the 2. Make sure the power switch is switched on.