Advanced Option Menu; Keyboard Control; Gamma Selection; Film Mode - Philips BDL4245E/27 User Manual

4.2.7. Advanced option menu

Input resolution
Picture
Black level expansion
Screen

Gamma selection

Scan mode
Audio
Scan conversion
PIP

Film mode

IR control
Configuration1

Keyboard control

Configuration2
Tiling
Heat status
Advanced option
Date and time
Input resolution
Set the resolution of the VGA input. This is only required when the
monitor is unable to detect the VGA input resolution correctly.
NOTE: T his item is functional for VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off the power
and turn it on again.
Black level expansion
Select a suitable black level expansion setting to reveal more details in
the dark parts of an image.
The options are: {Off} / {Low} / {Medium} / {High}.
NOTE: T his item is functional for Video mode inputs only.
Gamma selection
Select a display gamma value to best suit the image and optimize image
brightness and contrast.
The options are: {Native} / {2.2} / {2.4} / {S gamma}.
Scan mode
Change the display area of the image.
• {Overscan} - Display about 95% of the original size of the image.
The rest of the areas surrounding the image will be cut off.
• {Underscan} - Display the image in its original size.
NOTE: T his item is functional for HDMI-Video timing, DVI-D(HD
timing), DP(HD timing), and YPbPr inputs only.
Scan conversion
Choose to enable or disable the IP (Interlace to Progressive) conversion
function.
• {Progressive} - Enable the IP conversion function (recommended).
Once enabled, the interlace input signal will be converted to
progressive format for better display quality.
• {Interlace} - Disable the IP function. This mode is suitable for
displaying motion pictures, but it increases the chance of image
retention.
Film mode
Choose to turn on or off the film mode frame conversion function.
• {Auto} - Enable the film mode frame conversion function for
movies and motion pictures. The monitor converts a 24 frames-
per-second (24 fps) input signal format to DVD video signal format.
Once this function is enabled, it is recommended that you set the
{Scan conversion} function to {Progressive}.
• {Off} - Disable the film mode frame conversion function. This mode
is suitable for TV broadcasting and VCR signals.
IR control
Select the operation mode of the remote control when multiple
monitors are connected via the RS232C connection.
• {Normal} - All monitors can be operated normally by the remote
control.
• {Primary} - Designate this monitor as the primary monitor for
remote control operation. Only this monitor can be operated by
the remote control.
• {Secondary} - Designate this monitor as the secondary monitor. This
monitor can not be operated by the remote control, and will only
receive the control signal from the primary monitor via the RS232C
connection.
• {Lock} - Lock the remote control function of this monitor. To unlock,
press and hold the [DISPLAY] button on the remote control for 5
(five) seconds.
Keyboard control
Choose to enable or disable the monitor keyboard (control buttons)
function.
• {Lock} - Disable the keyboard function.
• {Unlock} - Enable the keyboard function.
Tiling
With this function you can create a single large-screen matrix (display
wall) that consists of up to 25 sets of this monitor (up to 5-set each at
the vertical and horizontal side). This function requires a daisy-chain
connection.
Tiling
H monitors
V monitors
Position
Frame comp.
Enable
Switch On Delay
Example: 2 x 2 screen matrix (4 monitors)
H monitors = 2 monitors
V monitors = 2 monitors
1
3
19
BDL3245E / BDL4245E / BDL4645E
1
1
1
No
No
Off
H monitors
2
4
Position