Mounting In Portrait Position; How To Use The Logo Guider For Portrait Position; How To Remove The Logo - Philips BDL4245E/27 User Manual

BDL3245E / BDL4245E / BDL4645E
1.6.

Mounting in Portrait Position

This monitot can be installed in portrait position.
1. Remove the table stand if they are attached.
2. The " " logo should be on the LEFT side when facing the monitor.

1.6.1. How to use the logo guider for portrait position

a. B efore applying, make sure that the guider is in good condition. Fold the
" " logo back in at the end of the guider.
b. P eel off the back side of the protective film from the logo.
c. A djust the logo guider to align it with the long side of the front bezel
and press the guider with your hand.
d. K eep pressing the guider with your one hand and use the other hand to
fold the logo out. Make sure that the logo is aligned with the front short
bezel. Press firmly and repeatedly on the logo to make the logo stick
tight on the front bezel.
e. Remove the guider.

1.6.2. How to remove the logo

1. Prepare a piece of paper with a cutting area of logo as a protector to
prevent the front bezel from scratching.
2. Using a knife, carefully remove the logo sticker with the paper placing
beneath.
3. Tear off the logo sticker.
NOTE: W hen installing the monitor on a wall, please consult a professional technician for proper installing. The manufacturer accepts no liability for
installations not performed by a professional technician.
90
4
90
2
1
3