LG RVF1000 Owner's Manual page 22

22 Installation
7-1. Select this option and press
Select [Next] and press OK to go to the next step or press
7-2.
• Static: Select this option when you set the network configuration manually.
7-1. Select this option and press
7-2. Set the below options.
-
IP Address: Enter the static IP address of the device.
- Subnet Mask: Enter the subnet mask IP address.
- Gateway: Enter the gateway IP address.
- DNS Server: Enter the IP address to configure DNS servers.
7-3. Select [Next] and press OK to go to the next step or press
8. Enter a descriptive name for the system.
3
When using the remote control
8-1. Press OK to edit the system name.
Enter the system name using the Remote control buttons and press OK to confirm it.
8-2.
• DEL.: Deletes the previous character at the cursor position.
• SPACE: Inserts space at the cursor position.
• 1/a/A: Changes the input type to numbers, small letters or capital letters.
Numbers/[ . * #]: Select the numbers, small letters or capital letters as selected input type. Press the button repeatedly to select
•
the character or symbol as you want.
8-3. Select [Next] and press OK to go to the next step or press
When using the virtual keyboard.
8-1. Select the virtual keyboard icon and press OK. The virtual keyboard input menu displayed.
Use the arrow buttons to select a letter and OK to confirm your selection.
8-2.
• a: Moves cursor to left.
• d: Moves cursor to right.
• Clear: Deletes the previous character at the cursor position.
• Clear All: Clear all the entered characters, numbers and symbols.
• Space: Inserts space at the cursor position.
• a/A/?!: Changes the virtual keyboard settings to small letters, capital letters or symbols.
• OK: Confirm and exit the menu.
• Cancel: Returns to the previous screen.
8-3. Select [Next] and press OK to go to the next step or press
9. The Wizard finish message is displayed, press OK to start VCS. The VCS main screen will be displayed.
. The IP address information window is displayed.
ll
ll
.
ll
ll
.
ll
.
ll
.
.