Installing The Software; Software Requirements - Epson EasyMP Network Projection Operation Manual

Installing the Software

You can find EasyMP Network Projection on the EPSON Projector
Software CD-ROM. Install the software on the computer you are using.

Software Requirements

EasyMP Network Projection runs on computers that meet the following
requirements.
For Windows
OS Windows 2000 Service Pack 4
The following 32 bit OS versions:
Windows XP
Windows XP Service Pack 1 or later
Windows Vista
Windows Vista Service Pack 1 or later
Windows 7
CPU Mobile Pentium III 1.2GHz or faster
Recommended: Pentium M 1.6GHz or faster
Amount of Memory 256MB or more
Recommended: 512MB or more
Hard Disk Space 20MB or more
Display Resolution of no less than XGA (1024x768) and no
higher than UXGA (1600x1200)
Display color of 16-bit color or greater (approx.
32000 display colors)
For Mac OS
OS Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.1 or later
Mac OS X 10.6.x
Recommended: Mac OS X 10.3.9/10.4.11/10.5.5
CPU PowerPC G3 900MHz or faster
Recommended: CoreDuo 1.83GHz or faster
Amount of Memory 256MB or more
Recommended: 512MB or more
Hard Disk Space 20MB or more
Display Resolution of no less than XGA (1024x768) and
no higher than UXGA (1600x1200)
Display color of 16-bit color or greater (approx.
32000 display colors)
* Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall settings
are not set correctly when the version is updated.
6
*