Print Head Alignment; Aligning The Print Head Using The Product Control Panel - Epson WorkForce Pro WP-4590 User Manual

Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
Parent topic:
Related topics
Replacing Ink Cartridges and Maintenance Boxes

Print Head Alignment

If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.

Aligning the Print Head Using the Product Control Panel

Aligning the Print Head Using a Computer Utility
Parent topic:
Related concepts
Print Head Cleaning
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Make sure plain paper is loaded in the product.
2. Press the
3. Press the arrow buttons to select Maintenance and press the OK button.
You see this screen:
Print Head Cleaning
Adjusting Print Quality
Setup button.
248