Cleaning And Transporting Your Product; Cleaning Your Product - Epson WorkForce Pro WP-4590 User Manual

Cleaning and Transporting Your Product

See these sections if you need to clean or transport your product.

Cleaning Your Product

Transporting Your Product
Cleaning Your Product
To keep your product working at its best, you should clean it several times a year.
Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
Do not use oil or other lubricants inside the product or let water get inside it.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
4. Remove all the paper from the rear MP tray.
5. Clean the rear MP tray using a soft brush.
6. Clean the scanner glass with a soft, lint-free cloth (microfiber is recommended), moistened with a
little glass cleaner.
Caution: Do not spray glass cleaner directly on the glass and do not press the glass surface with
any force.
7. Open the ADF cover and use a soft, dry, lint-free cloth (microfiber is recommended), to clean the
rollers and the interior of the ADF.
254