Epson WorkForce Pro WP-4590 User Manual page 31

9. To determine the network information you need to enter, print a network status sheet. Press the
Setup button on the control panel, select Network Settings, and press the OK button. Select
Confirm Network Settings and press the OK button. Press either of the
status sheet. (Press the
10. Locate the IP address on the network status sheet you just printed and enter it as the Printer Name
or IP Address in the Add Printer Wizard window. Click Next.
11. Click Finish.
You see this window:
12. Click Have disk.
13. Click Browse.
14. Locate and open the folder you unzipped in a previous step.
15. Do one of the following:
• If you are installing the PCL printer software, select EPUP6SETUP.inf and click OK.
• If you are installing the PostScript printer software, select eppsnt.inf and click OK.
You see a window like this:
Stop/Reset button if you want to cancel the operation.)
31
Start buttons to print a