Fax Report Options - Epson WorkForce Pro WP-4590 User Manual

Setting
DRD
ECM
V.34
Rings to Answer
Dial Tone Detection
Header
Parent topic:

Fax Report Options

Select the fax report or list you want to print.
Options
All
Single
Double
Triple
Double & Triple
On
Off
On
Off
1 to 9
On
Off
Fax Header
Your Phone
Number
Setting Up Fax Features Using the Product Control Panel
Description
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number as the
DRD setting so your product can receive faxes on the
correct number of rings. All is the default setting and
works for phone lines that do not use this service.
Turns on Error Correction Mode (ECM) to
automatically request retransmission of faxes
received with detected errors (default setting).
Turns off Error Correction Mode (ECM).
Transmits faxes at 33.6 Kbps (default setting)
Transmits faxes at 14.4 Kbps
Sets the number of rings before your product receives
a fax. The default setting is 4. If Auto Answer is turned
on and an answering machine is connected to the
product, make sure this setting is set higher than the
number of rings your answering machine is set to
answer a call.
Automatically dials the phone number you enter to
send a fax when the product detects a dial tone on the
line.
Turns off automatic dial tone detection. This is
necessary if you connected your product to a phone
line on a Private Branch Exchange (PBX) or Terminal
Adapter (TA) system.
Lets you set up the header information for outgoing
faxes.
191