Lights - Epson WorkForce WF-3010DW User Manual

User's Guide
Buttons
d
b
e
f
g

Lights

Lights
P
b
Getting to Know Your Product
Function
Loads or ejects paper.
Resumes printing after a paper out error, a paper jam error, or a multiple page feed error.
If the product's ink pads are nearing the end of their service life, printing can be resumed.
If the product is turned on while pressing and holding this button, the product prints the
product status sheet.
Press and hold for 3 seconds to clean the print head (black only).
When an expended ink cartridge is detected, press to move the print head to the ink cartridge
replacement position.
After ink cartridge replacement, press to return the print head to its home position.
Press and hold for 3 seconds to clean the print head (all colors except black).
When an expended ink cartridge is detected, press to move the print head to the ink cartridge
replacement position.
After ink cartridge replacement, press to return the print head to its home position.
Cancels printing during a print job.
Function
On when the product is on.
Flashes when the product is receiving data, printing, replacing an ink cartridge, charging ink,
or cleaning the print head.
Stays on while the printer is connected to a network. Flashes while network settings are being
adjusted (green: Wi-Fi/orange: Ethernet).
"Error indicators" on page 65
&
"Error indicators" on page 65
&
"Error indicators" on page 65
&
13