Cleaning Reminder; Cleaning The Oven Door - Electrolux EOC5440AAX User Manual

Eclipse design pyrolytic multifunction oven with retractable rotary controls in antifingerprint stainless steel.
Hide thumbs Also See for EOC5440AAX:
Table of Contents

Advertisement

Do not start the pyrolytic
cleaning if:
• You did not remove the shelf
supports or telescopic shelf
runners (if supplied). In some
models, the display shows "C1"
when this error occurs.
• You did not fully close the oven
door. In some models, the dis-
play shows "C3" when this error
occurs.
1.
Remove the worst dirt manually.
2.
Set the Pyrolytic cleaning function.
Refer to "Oven functions".
3.
flashes.
After 2 seconds the procedure starts.
The procedure is : h long.
You can use the End function to
delay the start of the cleaning pro-
cedure.
When the oven is at its set tem-
perature, the door locks. The dis-
play shows the symbol
bars of the heat indicator until the
door unlocks.
During the pyrolytic cleaning the
lamp is off.

Cleaning reminder

To remind you that the pyrolytic cleaning
is necessary, PYR flashes in the display
for 10 seconds after each activation and
deactivation of the appliance.

10.3 Cleaning the oven door

Removing the door and the glass panels
You can remove the oven door and the
internal glass panels to clean it. The num-
ber of glass panels is different for different
models.
WARNING!
Be careful when you remove the
door from the appliance. The door
is heavy.
The cleaning reminder goes off
the display:
• After the end of the Pyrolytic
• If you press "
10.2 Lamp
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass cov-
er can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
and the
Always use the same lamp type.
Replacing the lamp at the cavity
ceiling:
1.
Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
ENGLISH
cleaning function.
" and "
the same time while PYR flash-
es in the display.
25
" at

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eoc5440aa

Table of Contents