Placing Documents On The Platen Glass; Placing Documents In The Feeder - Canon imageCLASS MF4880dw Basic Operation Manual

CAUTION
When closing the
feeder, be careful not to
get your fi ngers caught.
20

Placing Documents on the Platen Glass

1
Open the feeder.
2
Place your document face down.
3
Align the document with the appropriate paper size marks.
•
If the document does not match any of the paper size marks, align the upper left
edge of your document with the arrow mark.
•
If the document is a transparency, place white paper above the document.
STMT
A5
B5
A4
LTR
4
Close the feeder.

Placing Documents in the Feeder

1
Open the document feeder tray.
2
Spread the document guides a little wider than the document's width.
When placing large documents, pull out the extension tray.
3
Fan the document stack and align the edges of the pages.
Thoroughly fan the
paper in small batches.
Align the edges a few
times on a fl at surface.