78
Performing a Scan Using a Shortcut Key
1
Make sure that the computer and the machine is connected (See the
Starter Guide).
2
→
Place documents (
3
Switch to the Scan mode (
4
Press [
] (Scan>PC1) or [
destination is registered.
When placing your
documents in the feeder
When placing your
documents on the
platen glass
Scan a Document with the MF Toolbox
You can specify various scan settings if you select <Remote Scanner> from the operation
panel, and then open the MF Toolbox.
1
Place your documents (
•
Use the feeder for a higher scan quality.
2
Switch to the Scan mode (
3
▲
▼
Press [
] or [
] to highlight <Remote Scanner>, and then press [OK].
Select the scan type.
Computer
Remote Scanner
4
From your computer, double-click the [Canon MF Toolbox 4.9] icon.
p.19).
→
p.16).
] (Scan>PC2) into which the desired
Scanning operation starts.
1. To continuously scan the document, press [
▼
[
] to highlight <Scan Next Original>, and then
press [OK].
▲
▼
2. press [
] or [
] to highlight <Store and Finish>,
and then press [OK].
Scanning operation starts.
→
p.19).
→
p.16).
▲
] or