Table of Contents
Advertisement
Controller Properties Menu Options
Option
Set Factory
Defaults
Cluster Mode
Rebuild Rate
BGI Rate
CC Rate
Reconstruction
Rate
NCQ
Coercion Mode
S.M.A.R.T.
Polling
2-30
Description
Use this option to load the default MegaRAID
The default is [No].
Use this option to enable or disable Cluster mode. The default is
[Disabled]. A cluster is a grouping of independent servers that can
access the same data storage and provide services to a common set
of clients. When Cluster mode is disabled, the system operates in
Standard mode.
Use this option to select the rebuild rate for drives connected to the
selected controller. The default is 30 percent. The rebuild rate is the
percentage of system resources dedicated to rebuilding a failed drive.
The higher the number, the more system resources devoted to a
rebuild.
Use this option to select the amount of system resources dedicated
to background initialization of virtual drives connected to the selected
controller. The default is 30 percent.
Use this option to select the amount of system resources dedicated
to consistency checks of virtual drives connected to the selected
contrroller. The default is 30 percent.
Use this option to select the amount of system resources dedicated
to reconstruction of drives connected to the selected controller. The
default is 30 percent.
Native Command Queuing (NCQ) gives an individual drive the ability to
optimize the order in which it executes the read and write commands.
The default is [Enabled].
Drive coercion is a tool for forcing drives of varying capacities to the
same size so they can be used in a drive group. The coercion mode
options are None, 128MB-way, and 1GB-way. The default is 1GB-way.
This option determines how frequently the controller polls for drives
reporting a Predictive Drive Failure (S.M.A.R.T. error). The default is
300 seconds (5 minutes).
WebBIOS CU settings.
®
Chapter 2: RAID configuration
Advertisement
Table of Contents
