Restoring Default Settings; Troubleshooting; Video And Audio - Dynex DX-32E150A11 User Manual

Troubleshooting

2 Press or to highlight SETTINGS, then press . The
SETTINGS menu opens.
Parental Controls
L n a g u g a e
Time
Closed Caption
Input Labels
Computer Settings
Reset to Default
3 Press or to highlight Input Labels, then press ENTER. The
Input Labels screen opens.
Present Label
Custom Label
Reset Label
4 Press or to highlight a preset label from several options, or
select Custom to enter your own label.
5 If you select Custom, press or to highlight Custom Label,
then press ENTER.
6 Press or to select a character, then press or to move to
the next position. Repeat this step to add more characters.
7 To reset the label to factory default, press or to highlight
Reset Label, then press ENTER.
8 Press EXIT to close the menu. The next time you press the INPUT
button on the remote control, you will see your new label in the
INPUT SOURCE menu.

Restoring default settings

Caution: When you restore default settings, all the settings (except the
password and parental rating) you have customized are reset.
To restore default settings:
1 Press MENU. The on-screen menu opens.
Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
PICTURE AUDIO CHANNELS SETTINGS
n E i l g h s
PICTURE AUDIO CHANNELS SETTINGS
Custom
PICTURE AUDIO CHANNELS SETTINGS
Energy Savings
48
57
70
0
6
2 Press or to highlight SETTINGS, then press . The
SETTINGS menu opens.
Parental Controls
L n a g u g a e
Time
Closed Caption
Input Labels
Computer Settings
Reset to Default
3 Press or to highlight Reset to Default, then press ENTER.
A confirmation box opens.
4 Press or to select Yes, then press ENTER.
5 Press EXIT to close the menu.
Troubleshooting
Warning: Do not try to repair your TV yourself. Contact authorized service
personnel.

Video and audio

Problem Solution
No picture (screen is • Make sure that the power cord is plugged
not lit) and no in.
sound.
• Press POWER
control.
• Make sure that the correct video input
source is selected. For more information,
see "Selecting the video input source" on
page 11.
• Try another channel. The station may be
experiencing problems.
Dark, poor, or no • Adjust the brightness. For more
picture (screen is lit), information, see "Adjusting the TV picture"
but sound is good. on page 13.
• Make sure that the correct picture mode is
selected. For more information, see
"Adjusting the TV picture" on page 13.
• Make sure that the antenna or cable TV is
connected correctly and securely. For more
information, see "Connecting an antenna,
cable TV, or satellite TV box" on page 8.
No color, dark • Adjust the color saturation. For more
picture, or color is information, see "Adjusting the TV picture"
not correct. on page 13.
Only snow (noise) • Try another channel. The station may be
appears on the experiencing problems.
screen. • Make sure that the antenna or cable TV is
connected correctly and securely. For more
information, see "Connecting an antenna,
cable TV, or satellite TV box" on page 8.
• Check the signal strength of the channel.
See "Checking the DTV signal strength" on
page 17.
Dotted lines or • Adjust the antenna.
stripes appear on • Move the TV away from noise sources such
the screen. as cars, neon signs, or hair dryers.
Double images. • Use a highly directional outdoor antenna or
cable TV.
DX-32E150A11
PICTURE AUDIO CHANNELS SETTINGS
n E i l g h s
on the TV or the remote
25