Restoring Settings To Default; Using A Usb Flash Drive; Switching To Usb Mode; Browsing Photos - Dynex DX-32L200NA14 User Manual

34
DX-32L200NA14

Restoring settings to default

Caution
When you restore default settings, all the settings
you have customized are reset.
To restore settings to default:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Settings, then press . The
Settings menu opens.
3
Press or to highlight Reset to Default, then
press ENTER. A confirmation box opens.
4
Press or to select Yes (to reset all settings to
factory default), or No (to not reset).
5
Press EXIT to close the menu.

Using a USB flash drive

You can connect a USB flash drive to your TV to view
compatible JPEG pictures.
Notes
• The JPEG picture viewer only supports JPEG
format images (with ".jpg" file extensions).
• Not all JPEG files are compatible with your TV.

Switching to USB mode

To switch to USB mode:
1
Make sure that you have connected the USB flash
drive to the USB port on the side of your TV.
2
Press INPUT. The INPUT SOURCE list opens.
3
Press or to highlight USB, then press ENTER.
Note
To exit USB mode, press INPUT to open the INPUT
SOURCE list, then select another input source.

Browsing photos

To browse photos on a USB flash drive:
1
Switch to USB mode (see
on page 34).
2
Press MENU. The USB menu opens.
3
Press to access the menu. Photos is highlighted.
4
Press ENTER to access the menu. The USB Photos
menu opens with Browse Photos highlighted.
5
Press ENTER. The screen displays folder names and
photo files stored on the USB flash drive in a
thumbnail index with the first photo or folder
highlighted. A control bar appears at the bottom of
the screen.
6
To navigate the thumbnail index screen, press:
• or to browse through the files and
folders.
• ENTER to view a highlighted photo full screen, or
open a highlighted folder.
• MENU to open the USB menu.
• FAV to add or remove a photo from the favorite
photo list. A heart appears on a photo that has
been added to the list.
Restoring settings to default
"Switching to USB mode"