Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source; Selecting A Channel - Dynex DX-32E150A11 User Manual

32" lcd tv
Hide thumbs Also See for DX-32E150A11:
Table of Contents

Advertisement

Understanding the basics

If you selected Antenna or Cable, your TV automatically scans
for available channels in your area and stores the channel
information in the channel list. This may take several minutes.
While scanning, the TV displays a progress report.
– OR –
If you selected Cable/Satellite Box, the auto scan is not
necessary and the screen will ask you to select the correct input
source for your set top box. Press EXIT to close the menu.
Note: Channel scan can take up to 20+ minutes.
You can press EXIT at any time to stop the auto scan, but you will need to
run the auto scan again to create a channel list.
12 Select the corresponding video input source through the Source
List.
Understanding the basics

Turning your TV on or off

To turn your TV on or off (standby mode):
1 Plug the power cord into an AC power outlet.
2 Press
(power). Your TV turns on.
3 Press
again to turn off your TV. When you turn off your TV, it
goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To
completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it
automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press the INPUT key on the remote, or the
INPUT button on the TV. The Source List menu opens.
2 Press or to highlight the video source, then press ENTER.
You can also press TV to switch to TV mode.

Selecting a channel

To select a channel:
• Press CH+ or CH- to go to the next or previous channel on the
memorized channel list.
• Press the number buttons to enter the analog or digital (main)
channel number you want, then wait for the channel to change,
or press ENTER to change the channel immediately.
• To select a digital sub-channel, press the number buttons to
select the main digital channel, then press the dot (.) button
to select the sub-channel. Wait for the channel to change, or
press ENTER to change the channel immediately.
Source List
TV
AV
VGA
HDMI1
HDMI2
Note: Button presses must be within three seconds of each other.
• Press RECALL to go to the last channel viewed.

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the volume.
• Press MUTE to temporarily turn off all sound. Press MUTE again
to restore the sound.

Displaying additional information

To display additional information:
• Press INFO to show an information banner. The information
banner shows current program information such as resolution.
• Digital mode information—Displays program name, time,
channel number, channel label, TV rating, resolution, and
current signal strength, and audio information.
• Analog mode information—Displays channel number,
audio information, TV rating, resolution, channel label, and
current signal strength.
• Press GUIDE to show the digital program guide, which may show
a list of available programs, program times, and program
summaries, depending on the information provided by the
broadcaster.

On-screen menu overview

PICTURE menu
PICTURE
Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
AUDIO menu
PICTURE
Sound Mode
Treble
Bass
Balance
Surround
MTS/SAP
Audio Language
Digital Audio/SPDIF
DX-32E150A11
AUDIO
CHANNELS SETTINGS
Energy Savings
48
57
70
0
6
AUDIO
CHANNELS SETTINGS
Standard
50
40
0
On
STEREO
English
PCM
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents