Connecting A Digital Audio Amplifier; Turning On Your Tv For The First Time - Dynex DX-32E150A11 User Manual

10
DX-32E150A11

Connecting a digital audio amplifier

You can connect your TV's audio to a digital audio amplifier or home
theater system.
To connect a digital audio amplifier:
1 Make sure that your TV's power cord is unplugged and the audio
device is turned off.
2 Plug an optical digital cable into the DIGITAL OUT jack on the back
of your TV.
3 Plug the other end of the digital optical cable into the digital
optical input jack of your digital audio amplifier or home theater
system.
Note: The DIGITAL OUT jack only works with digital sources.
Back of TV
Turning on your TV for the first
time
To configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected your devices to the TV, and connected the AC
power.
2 Press (Power), then wait several seconds. The initial Setup
Wizard screen opens (only the first time you turn on your TV).
Choose your menu Language
English
Français
Español
3 Press or to select the menu language you want, then press
ENTER. The Time screen opens.
Mode
i T m e Z o n e
Daylight Savings
Year
Month
Day
Time
Digital amplifier or
home theater system
Digital optical audio cable
Setup Wizard
Setup Wizard
Time
Auto
a P i c c i f
Off
2000
Jan
13
12 : 07 AM

Turning on your TV for the first time

4 Press or to highlight Mode, then press
Manual (to set the date and time manually), or Auto (the date
and time are automatically set by the TV signal source, based on
the time zone you select).
5 Press or to highlight Time Zone, then press or to
select your time zone. You can select Pacific, Alaska, Hawaii,
Newfoundland, Atlantic, Eastern, Central, or Mountain.
6 If your viewing area observes daylight savings time, press or
to highlight Daylight Savings, then press or to select
On.
7 If you select Manual mode, make the settings as follows:
• Press or to highlight Year, Month, or Day, then press
or to adjust the setting.
• Set the time by pressing or to highlight Time, then
press highlight the hour, minute, or AM/PM field.
or to
Press or to adjust the setting.
8 Press ENTER. The Choose your Picture Mode screen opens.
Choose your Picture Mode
Home Mode
Retail Mode
9 Press or to select Home Mode or Retail Mode, then press
ENTER.
If you select Home Mode, the Choose your TV source screen
opens.
-OR-
If you select Retail Mode, a message stating "Are you sure you
want Retail mode? Since in this mode Energy saving is not
realized." appears. Select Yes to proceed or No to go to the
previous screen.
Choose your TV Source
Antenna
Cable
Cable/Satellite Box
10 Press or to select Antenna, Cable, or Cable/Satellite
Box, depending on the type of connection you have.
• If you are using an antenna for a standard or HD TV signal,
select Antenna.
• If your cable is connected directly to the TV (without a tuner
box), select Cable.
• If your cable is connected to your TV through a tuner box,
select Cable/Satellite Box.
11 Press ENTER hen you have made your selection. The channel
w
scan screen opens.
or to select
Setup Wizard
Setup Wizard
Analog Channels
0
Digital Channels
0