Reinstalling Feature Licenses; Ctp Controls Port Lights - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Table 3 Zoning limits
Number of zone members in a zone
Number of zones in a zone set
Number of unique zone members in a zone set
Total number of zone members in a zone set (where a zone
member can be in multiple zones)
Characters per zoning name
Number of unique zone members in HAFM Zoning Library
Number of zones in HAFM Zoning Library
Number of zone sets in HAFM Zoning Library
Number of end ports
Number of devices supported (including loop devices)
Using the same firmware level
All Directors and Edge Switches in the same fabric should have the same firmware level
installed—whether 1Gb/s, 2Gb/s, or 4Gb/s capable—to ensure that this firmware
operates correctly.
The Edge Switch 2/12 had an interim firmware 05.00.00-12. This firmware cannot be
used for any other Edge Switch or Director. This interim version is compatible with
the M-Series firmware 05.02.00-13 used for the rest of the M-Series fabric products.
Firmware 08.01.00 is common for all M-Series fabric products, including the Edge
Switch 2/12.
Firmware 06.02.00-22 provides support for second-generation Edge Switch 2/12 and
Edge Switch 2/24 switches. This is the minimum M-Series firmware supported on the
second-generation Edge Switch 2/12 and Edge Switch 2/24.

Reinstalling feature licenses

Feature licenses (or keys) must be reinstalled after performing a factory reset on an
Edge Switch or Director to regain use of the licensed features (for example, SANtegrity
Binding).

CTP controls port lights

Port lights on the Edge Switches and Directors are controlled by the CTP. Certain activities
such as firmware updates, IPLing the CTP, or switching over to the backup CTP (Director)
16
Zoning parameter
Maximum value
2048
1024
2048
4096
32
2048
1024
64
1024
1024