Using The Same Firmware; Reinstalling Feature Licenses - HP StorageWorks 2/140 - Director Switch Release Note

Table 2: Zoning Parameters Supported Limits
Number of end ports
Unique zone members
Members per zone
Zones
Number of zone sets
Maximum devices supported
Note:
32 characters. On all edge switches and directors except the Director 2/140, the
maximum number of zones decreases if full 64 character names are used. The
supported limits are based on two members per zone.
Zone set sizes are affected by the number of zones in the zone set, the length of
each zone name, the number of members in each zone, and the Interoperability
mode of the fabric. Please consult with HP Professional Services or your support
representative if you have questions regarding specific zone set configurations.

Using the Same Firmware

All switches and directors in the same fabric should have the same firmware level
installed—whether 1 Gbps or 2 Gbps capable.

Reinstalling Feature Licenses

Feature Licenses (or keys) must be reinstalled after performing a factory reset on a
director to regain use of the licensed features (e.g., SANtegrity Binding).
Director Release Notes
Zoning Parameter
The supported number of zones is based on a zone name with a maximum of
Maximum Value
1024
1024
1024
1024
64
1024
Important Information
15