Fujitsu MHM2100AT - Mobile 10 GB Hard Drive Product Manual page 30

1.7 Reliability
(1) Mean time between failures (MTBF)
Conditions of 300,000 h
MTBF is defined as follows:
MTBF=
*1 "Disk drive defects" refers to defects that involve repair, readjustment, or
replacement. Disk drive defects do not include failures caused by external
factors, such as damage caused by handling, inappropriate operating
environments, defects in the power supply host system, or interface cable.
(2) Mean time to repair (MTTR)
The mean time to repair (MTTR) is 30 minutes or less, if repaired by a specialist
maintenance staff member.
(3) Service life
In situations where management and handling are correct, the disk drive requires
no overhaul for five years when the DE surface temperature is less than 48°C.
When the DE surface temperature exceeds 48°C, the disk drives requires no
overhaul for five years or 20,000 hours of operation, whichever occurs first.
Refer to item (3) in Subsection 3.2 for the measurement point of the DE surface
temperature. Also the operating conditions except the environment temperature
are based on the MTBF conditions.
(4) Data assurance in the event of power failure
Except for the data block being written to, the data on the disk media is assured in
the event of any power supply abnormalities. This does not include power supply
abnormalities during disk media initialization (formatting) or processing of
defects (alternative block assignment).
C141-E104-03EN
Power-on time
Operating time
CSS operations
Power on/off
Environment
Total operation time in all fields
number of device failure in all fields (*1)
1.7 Reliability
250H/month or less 3000H/years
or less
20% or less of power-on time
50/day or less
Total 50,000 or less
1/day or more needed.
5 to 55°C/8 to 90%
But humidity bulb temperature
29°C or less
(H)
1-9