Fujitsu MHM2100AT - Mobile 10 GB Hard Drive Product Manual page 148

Self-test
execution status
0
1
2
3
4
5
6
7
8 to 14
15
Off-line data collection capability
•
Indicates the method of off-line data collection carried out by the drive. If the
off-line data collection capability is 0, it indicates that off-line data collection
is not supported.
Bit
0
1
2
3
4
Failure prediction capability flag
•
Bit 0: The attribute value data is saved to a media before the device enters
Bit 1: The device automatically saves the attribute value data to a media
Bits 2 to 15: Reserved bits
Error logging capability
•
Bit 0: Indicates that error logging function.
Bits 1 to 7: Reserved bits
C141-E104-03EN
Self-test has been completed normally or has not been
executed.
Self-test has been stopped by the host computer.
Self-test has been suspended by hard or soft reset.
Self-test has been aborted by a fatal error.
Self-test has been completed abnormally by an unknown
meaning.
Self-test has been completed abnormally by write test.
Self-test has been completed abnormally by serbo test.
Self-test has been completed abnormally by read test.
Reserved
Self-test is in progress.
Indicates that Execute Off-Line Immediate is supported.
Vendor unique
Indicates that off-line data collection being executed is
aborted when a new command is received.
Indicates that supports off-line read scan function.
Indicates that supports self-test function.
power saving mode.
after the previously set operation.
5.3 Host Commands
Meaning
Meaning
5-71