Color profile: Disabled
If necessary, you can override the 1W power output setting during an
Warning: This is an emergency procedure and should be used
Press the PTT switch on your
Press and hold 1W/25W.
Releasing the 1W/25W returns to
Transmitting with the MC535
Press the PTT switch, to activate the
Release the PTT switch, to end the
Note: If the PTT switch is held down and the power is turned on, a
warning tone sounds, the LED display begins to flash, and the
unit will not transmit. The MC535 resets for normal operation
when the PTT switch is released.
If the PTT switch on your microphone is held for more than 5-minutes, the
MC535 transmitter automatically shuts off, a warning tone sounds, and
the LED display begins to flash. This prevents damage to your receiver,
and — in the event that the transmission is unintentional —
communication frequencies will not be jammed.
Tue Sep 08 10:53:53 1998