Removing The Two-Piece Bezel - IBM 9228 - IntelliStation Z - Pro User Manual

Removing the two-piece bezel

When working with some options, such as a bay 1 through bay 7, you must first
remove the two-piece bezel to access the option.
Notes:
1. Before you remove the upper bezel, you must first remove the lower bezel.
2. If you are only removing the lower bezel, you do not have to remove the side
To remove the two-piece bezel, complete the following steps:
1. Read the safety information that begins on page v and "Installation guidelines"
2. Turn off the computer and all attached devices (see "Turning off the computer"
3. Unlock the side cover.
4. Remove the side cover (see "Removing the side cover" on page 35).
5. Remove the lower bezel.
6. Remove the upper bezel.
36
IBM IntelliStation Z Pro Type 9228: User's Guide
cover. However, the side cover must be unlocked.
on page 29.
on page 18); then, disconnect all power cords and external cables.
a. Press the round blue release button on the upper-right side of the lower
bezel.
b. Tilt the lower bezel forward; then, lift it up to disengage the bottom tabs from
the chassis. Store the bezel for future use.